ASI Custom Gunsmith Services for your Remington 700 Rifle
| New Barrels - With Installation Included | ||
| ASI - Ultra Match Stainless Steel - Button Rifled, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's, Lengths up to 26.5". | $749.99 | |
| ASI - Ultra Match CM (Blued Steel) - Button Rifled, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's Lengths up to 26.5". | $749.99 | |
| Krieger - Stainless - single point cut rifling, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's, Lengths up to 26.5". | $899.99 | |
| Length's Over 26.5". | Add | $100.00 |
| Barrel job's come with a Accuracy Guarantee and a test target to verify result's with the use of factory ammo. | ||
| Gunsmith Services Below | Part | Labor |
| New Trigger - Match single stage 1.5 - 3.5 lbs. available pull weight with no creep | $129.99 | $100.00 to Install. |
| Trigger Job | $65.00 | |
| Trigger - Install your supplied Trigger and set pull weight. | $100.00 | |
| Barrel fluting adds looks, cooling and lightning | ||
| - Without removing barrel from action. | $179.00 | |
| - With having to remove barrel from action. | $279.00 | |
| Barrel threading for brakes, flash hiders, compensators & etc. | ||
| - Without removing barrel from action. | $100.00 | |
| - With us having to remove barrel from action. | $279.00 | |
| Re chamber using existing extractor and bolt face | ||
| - | $475.00 | |
| Re crown barrel | ||
| - Without removing barrel from action if possible. | $50.00 | |
| - With having to remove barrel from action. | $279.00 | |
| Shortening barrel | ||
| - Without removing barrel from action. | $200.00 | |
| - With having to remove barrel from action. *Includes re crowning barrel. | $299.00 | |
| Barrel turning OD change | ||
| - Without removing barrel from action. | $175.00 | |
| - With having to remove barrel from action. | $275.00 | |
| Correct head space | ||
| - | $375.00 | |
| Re throat & barrel setback for accuracy | ||
| - | $475.00 | |
| Open bolt face for larger caliber | ||
| - Install Sako™ style extractor | $275.00 | |
| Open receiver feed lip's for larger caliber | ||
| - Without removing barrel from action. | $100.00 | |
| - With having to remove barrel from action. | $200.00 | |
| True Bolt & action | ||
| - When installing new barrel Truing ways, lugs, & refacing receiver & bolt are included. | $499.99 | |
| - Advanced includes, New One piece bolt with Sako style extractor, threaded bolt stem with tactical knob installed, Recut ways, lugs, & reface receiver. | $699.99 | |
| Epoxy bed Action | ||
| - | $275.00 | |
| Pillar Bed Stock & Action | ||
| - | $275.00 | |
| Tactical Bolt Knob | ||
| - We just need the bolt sent to us if we do not already have it. | ||
| - We machine off old bolt knob, Thread post & Install new knob. | $149.00 | |
| Mount & Bore Sight Scope. | ||
| - | $100.00 | |
| Drill & Tap Receiver for larger Scope base Screws. | ||
| - Per Screw | $40.00 | |
| Lap Scope Rings | ||
| - | $100.00 | |
| Range test. | ||
| - Includes test target with up to one box of ammo. * Some ammo will cost more. | $132.00 | |
| Hourly Shop Rate | ||
| One Hour Minimum | $100.00 | |
| For Services Other Than Shown here Please call or email for pricing. | E-Mail Us | 303-822-6849 |
Tactical Bolt Knob - Installation Service
 Factory Comparison Remington Bolt knob |
 Tactical Bolt Knob Installed |
- Better grip for faster target acquisition.
- Less Reaching like the factory's Tiny Knob.
- Threaded bolt knob stem for remove ability unlike the factory.