Pricing For Services, Re-Barrels, Re-Builds & Blue Printing
ASI Custom Gunsmith Services for your Remington 700 Rifle
| New Barrels - With Installation Included | ||
| ASI - Ultra Match Stainless Steel - Button Rifled, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's, Lengths up to 26.5". | $749.99 | |
| ASI - Ultra Match CM (Blued Steel) - Button Rifled, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's Lengths up to 26.5". | $749.99 | |
| Krieger - Stainless - single point cut rifling, Air Gauged, Hand Lapped, Chambered, 11° Muzzle Crown, Contoured, Lapping of bolt lug's, Lengths up to 26.5". | $899.99 | |
| Length's Over 26.5". | Add | $100.00 |
| Barrel job's come with a Accuracy Guarantee and a test target to verify result's with the use of factory ammo. | ||
| Gunsmith Services Below | Part | Labor |
| New Trigger - Match single stage 1.5 - 3.5 lbs. available pull weight with no creep | $129.99 | |
| New Trigger - Installation | $100.00 | |
| Trigger Job | $65.00 | |
| Trigger - Install your supplied Trigger and set pull weight. | $100.00 | |
| Barrel fluting adds looks, cooling and lightning | ||
| - Without removing barrel from action. | $199.00 | |
| - With having to remove barrel from action. | $279.00 | |
| Barrel threading for brakes, flash hiders, compensators & etc. | ||
| - Without removing barrel from action. | $100.00 | |
| - With us having to remove barrel from action. | $279.00 | |
| Re chamber using existing extractor and bolt face | ||
| - | $475.00 | |
| Re crown barrel | ||
| - Without removing barrel from action if possible. | $50.00 | |
| - With having to remove barrel from action. | $279.00 | |
| Shortening barrel | ||
| - Without removing barrel from action. | $200.00 | |
| - With having to remove barrel from action. *Includes re crowning barrel. | $299.00 | |
| Barrel turning OD change | ||
| - Without removing barrel from action. | $175.00 | |
| - With having to remove barrel from action. | $275.00 | |
| Correct head space | ||
| - | $375.00 | |
| Re throat & barrel setback for accuracy | ||
| - | $475.00 | |
| Open receiver feed lips for larger caliber | ||
| - Without removing barrel from action. | $100.00 | |
| - With having to remove barrel from action. | $200.00 | |
| True Bolt & action | ||
| - When installing new barrel We True: raceways, lugs, reface the receiver, New One Piece bolt with M16 Style Extractor and Tear Drop Bolt Knob are included. | $749.99 | |
| Epoxy bed Action | ||
| - | $275.00 | |
| Pillar Bed Stock & Action | ||
| - | $275.00 | |
| Tactical Bolt Knob | ||
| - We just need the bolt sent to us if we do not already have it. | ||
| - We machine off old bolt knob, Thread post & Install new knob. | $149.00 | |
| Mount & Bore Sight Scope. | ||
| - | $100.00 | |
| Drill & Tap Receiver for larger Scope base Screws. | ||
| - Per Screw | $40.00 | |
| Lap Scope Rings | ||
| - | $100.00 | |
| Range test. | ||
| - Includes test target with up to one box of ammo. * Some ammo will cost more. | $132.00 | |
| Hourly Shop Rate | ||
| One Hour Minimum | $100.00 | |
For Services Other Than Shown here Please E-Mail Us or Call 303-822-6849 for pricing.
Tactical Bolt Knob - Installation Service
 Factory Comparison Remington Bolt knob |
 Tactical Bolt Knob Installed |
- Better grip for faster target acquisition.
- Less Reaching like the factory's Tiny Knob.
- Threaded bolt knob stem for remove ability unlike the factory.
Custom Remington 700 Rifle Re-Barrels & Re-Builds
At Accuracy Systems our goal is to give you that edge you are looking for. Plain and simple. That's Accuracy! Our name says it all!
There are many companies out there to say the least. With a wide range of pricing. We feel the bottom line should be the results that we achieve. You will find the results you get from our barrel conversions are reasonably Priced. We believe you should only pay for the result.
|
Most rifles guaranteed to shoot under ½ MOA @ 100 yards. We can also build your present action to look and perform like any one of these shown! We have many calibers available. All barrel Replacements and Rifle conversions come with a test target to verify accuracy! |
Click image to see closer view. For a reference to the group size the target circle is ¾” in diameter. |
Pricing For Services, Re-Barrels, Re-Builds & Blue Printing
Order # 401
Order # 402
Order # 403
Order # 404
Order # 405
Order # 406
Order # 407
Order # 408
Order # 409
Order # 410